ReTrigLength

Length of retrigger. Tick = xx/16. Range 0x01 – 0x100 (NB: 00 = 100 = 16 ticks)

Trigger

1 to sample new input and initiate retrigger. 0 to to turn retrigger off.

Retrigger volume

Manual volume

Buffer Mode

0 [New] – overwrites the current buffer when a new one is triggered by the trigger parameter. 1 [Add] – adds input to the current buffer. Note that there is no automatic gain reduction so if you keep sampling with the Buffer mode set to 1 it will become increasingly loud. :

Effect

Activate effect command. See list below.

Argument

Sets the value of the effect command. See list below.

Attack

Envelope/declicker. Ramps up at the beginning of a retrigger.

Decay

Envelope/declicker. Ramps down at the end of a retrigger.

Dry Volume

Dry Volume

00

Manually set the machine to read from the beginning of the buffer. Can also me used to 'revive' buffers that have been turned off with a '0' in the Trigger column.

01

Increase or decrease the volume each retrigger. 80 = 1

02

Increase or decrease the retrigger length each retrigger. 80 = 1

03

Manual offset Tick = Argument/16

04

Increase or decrease the offset each retrigger 80 = 1

05

Reverse. No argument needed.

06

Manual pan. 80 = Centre

07

Move Pan position by an amount each retrigger. 80 = 1

08

Random Pan. Argument = Amount.

09

Random Volume

0A

Manual Pitch

0B

Increase or decrease the Pitch each retrigger

0C

Random Pitch. Argument = Amount.

0D

Manual pitch in semi-tones. 80 = root

0E

Randomise retrigger length. Argument = Amount.

0F

Manual end declicker/Volume ramp. Direction=down. Argument is the fraction of a tick to ramp down. I.e. 80 would start the ramp down halfway through the tick and finish when the tick ends. Useful when a new retrigger is initiated when another is halfway through...

A0

Turns all Effects off.

Ax

Turns individual effects off. I.g. A5 would turn only the reverse off whereas AA would only turn the manual pitch off.